Scotchman CPO 350 PK 14″ Manual Ferrous 230V Three Phase Low Turn Dual Speed Circular Cold Saw 076748
$7,889.05Current price is: $7,889.05.
- Cutting Speeds: (LT) 3 hp, 22/44 rpm
- Air operated double self-centering vise assures burr-free cuts
- Motor: 3 hp, 230 Volt, 3 Phase
- Made in the USA with a 3-year parts warranty
Scotchman CPO 350 PK 14″ Manual Ferrous 230V Three Phase Low Turn Dual Speed Circular Cold Saw 076748 is a Scotchman product in the Cold Saws collection.
Product Details
- Cutting Speeds: (LT) 3 hp, 22/44 rpm
- Air operated double self-centering vise assures burr-free cuts
- Motor: 3 hp, 230 Volt, 3 Phase
- Made in the USA with a 3-year parts warranty
- Features
- Operator controlled trigger switch
- Miter capabilities 45 degrees left to 45 degrees right
- Miter locking device: Quick, accurate settings-stops at 45 degrees left, 90 degrees, and 45 degrees right
- Capable of slotting
- Double reduction, hardened and ground worm and wheel gear box
- Chip drawer
- 7 Gallon flood coolant tank with pump
- One 315 mm diameter HSS blade
- One blade wrench
- One gallon coolant
- Complies with ANSI B11.10 safety standards
- Warranty: Three years on parts
- Made in USA
- Specifications
- Cutting Speeds: LT (Low Turn)- designed for solid mild steel, solid stainless steel & thick wall pipe: 3 hp, 22/44 rpm
- Max. Cutting Capacities (based on mild steel): Tubing: Round 90°: 4-1/2" Square 90°: 4-1/4" x 4-1/4" Rectangle 90°: 5-1/2" x 4" Round 45°: 4" Square 45°: 3-3/4" x 3-3/4" Rectangle 45°: 3-3/4" x 3-3/4" Solid Round 90°: 1-3/4" Square 90°: 1-3/4" x 1-3/4" Round 45°: 1-1/2" Square 45°: 1-1/2" x 1-1/2"
- Tubing: Round 90°: 4-1/2" Square 90°: 4-1/4" x 4-1/4" Rectangle 90°: 5-1/2" x 4" Round 45°: 4" Square 45°: 3-3/4" x 3-3/4" Rectangle 45°: 3-3/4" x 3-3/4"
- Round 90°: 4-1/2"
- Square 90°: 4-1/4" x 4-1/4"
- Rectangle 90°: 5-1/2" x 4"
- Round 45°: 4"
- Square 45°: 3-3/4" x 3-3/4"
- Rectangle 45°: 3-3/4" x 3-3/4"
- Solid Round 90°: 1-3/4" Square 90°: 1-3/4" x 1-3/4" Round 45°: 1-1/2" Square 45°: 1-1/2" x 1-1/2"
- Round 90°: 1-3/4"
- Square 90°: 1-3/4" x 1-3/4"
- Round 45°: 1-1/2"
- Square 45°: 1-1/2" x 1-1/2"
- Motor: 3 hp, 230 Volt, Three Phase
- Max. Diameter Blade: 350 mm
- Arbor Bore: 40 mm
- Pin Spacing: 4/12/64
- Width: 21-7/8"
- Depth: 43-1/2"
- Height (not including feed handle): 56-1/4"
- Height (floor to vise): 37-7/16"
- Shipping Weight (may vary): 690 lbs.
Specifications
- Manufacturer: Scotchman
- SKU: 076748
- Shipping Method: LTL Freight
- Weight: 690 lb
- Dimensions: 25 × 45 × 60 in
- Country of Origin: United States of America
- Warranty: 3 Years (Parts)
| Weight | 690.0 lbs |
|---|---|
| Dimensions | 25.0 × 45.0 × 60.0 in |
| Brand | Scotchman |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Audatech Hydro Pneumatic Corner Crimping Machine VECTRA 150
Baileigh 60″ x 144″ CNC Water Jet WJ-512CNC
Baileigh 96″ x 60″ CNC Water Jet WJ-85CNC
FlexArm Hydraulic Tapping Unit GH-30-I
Laguna Tools 110V 150W SmartShop EX CNC Laser Cutter
Reviews
There are no reviews yet.