Baileigh Four Roll Plate Bending Machine PR-10500-4
$59,497.50Current price is: $59,497.50.
- Rolling Cap. (Mild Steel) .55"
- Forming Width 122"
- Number of Rolls 4
- Driven Rolls 2
Baileigh Four Roll Plate Bending Machine PR-10500-4 is a Baileigh Industrial product in the Plate Roll collection.
Product Details
- Rolling Cap. (Mild Steel) .55"
- Forming Width 122"
- Number of Rolls 4
- Driven Rolls 2
- Description
- The PR-10500-4 four roll plate bending machine has been refined over the years through extensive research and development and is considered one of the finest plate rolling machines available in the market. A 4 roll machine is the easiest, quickest, rolling machine to operate thanks to its ability to pinch the plate between the 2 central driven rolls, pre-bend the leading edge, and rolling the body of the part along with the trailing edge all in one direction and in one pass. There is no chance to lose the position of the plate due to being pinched at all times during the rolling cycle.
- The 2 central driven rolls on the PR-10500-4 are rotated by hydraulic motors and high efficiency planetary gearboxes coupled directly to the rolls. This hydraulic gearbox is driven by a large 10hp motor that operates on 480volt three phase power.
- 1/2" mild steel capacity
- 120" length
- 4 forming rolls
- 2 driven rolls
- Hydraulically driven
- Moveable console with DRO
- Hydraulic system for helping to remove material
- Epicycloidal gear boxes
- Hardened and polished rolls
- Conical bending system
- Torsion bars for perfect parallelism
- Planetary movement of side rolls
- Specifications
- Item Number PR-10500-4
- Top Roll Dia. 11.4"
- Bottom Roll Dia. 10.6"
- Programming Manual
- Roll Speed 16 fpm. (5 mpm)
- Upper Roll Dia. 8.662"
- Roll Adjustment Back Hydraulic
- Motor 10 hp.
- Power 480V / 3-phase
- Shipping Weight 17,600 lbs.
- Shipping Dimensions 176" x 58" x 39"
Specifications
- Manufacturer: Baileigh Industrial
- SKU: BA9-1008483
- UPC: 19907682325
- Shipping Method: Flatbed
- Weight: 17,600 lb
- Country of Origin: China
| Weight | 17600.0 lbs |
|---|---|
| Brand | Baileigh Industrial |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Audatech Hydro Pneumatic Corner Crimping Machine VECTRA 150
Baileigh 48″ x 48″ CNC Water Jet WJ-4X4CNC
Baileigh Pneumatic Tapping Arm ATM-27-1900
Reviews
There are no reviews yet.