Carell Industrial HPK-100 480V Three Phase 3½” Pipe 3-Driving-Rolls Double Pinch Hydraulic Universal Roll Bender HPK100

Carell Industrial HPK-100 480V Three Phase 3½” Pipe 3-Driving-Rolls Double Pinch Hydraulic Universal Roll Bender HPK100 is a Carell Industrial Solutions product in the Roll Benders collection.

Product Details

• Shaft diameters: 3.94”
• Roll diameters: 12.4” nominal
• Section modulus: 2.75 / 4.88 cu.in.
• Speed (variable): 4 – 23 fpm
• Description
• Carell’s Model HPK 100 is a 3 driving rolls, double initial pinch universal roll bending machine with hydraulic powered rotation and independent hydraulic powered adjustment of both lateral bending rolls. Lateral guides are adjustable in all three planes. This versatile unit is ideal for rolling standard/special sections plus tube/pipe in mild-structural-stainless steels and a variety of other materials. The angle bending capacity is: leg out 4” x ½”, leg-in 3½” x 3/8”, with standard equipment.
• Machines are equipped with a set of universal rolls suitable for bending standard sections including angle iron leg-in and leg-out. These rolls bend flat bar (on flat and on edge), square bar, tees, channel as well as round bar, angles, square and rectangular tube sections.
• Features
• Rugged, rigid, one piece solid steel weldment frame, normalized and precision machined, ample sized access panels and ventilation for internal hydraulic unit
• Larger, high strength steel shafts, heat treated and ground, journaled in dual self-aligning spherical roller bearings for optimum performance, loading and efficiency
• Independent hydraulic adjustment of both lower rolls for double pre-bending
• All 3 rolls driven by hydraulic motor/planetary reducer group with final gear drive top shaft protected by speed compensation clutch, hydraulic unit integral to the machine and protected by maximum pressure relief valves and return lines. Roll rotation via pushbutton from the control console
• Hydraulic power unit integral to the machine frame, well ventilated and protected from overload by maximum pressure relief valves and thermal pump motor switchgear with reset control. Solenoid valve bank situated for easy access, coils equipped with LED illumination indicating its activation
• Multi axis, 6 way, fully adjustable lateral guides, powered in all three directions: (radial, axial thrust, and linear up/down movements) for bending angle iron leg-in and leg-out. Positions readable on graduated scales for precise repeat positioning. Cam follower roller can be positioned at different locations along the cylindrical support roller
• Variable speed rotation on “V” version via digitally driven valves for precision pre-bending and maximum efficiency during general bending or pass through of unbent material
• Universal bending rolls with modular components, hardened and wear resistant. Use of components in various configurations permits bending of most all-standard section types including angle iron leg-in and leg-out. Main components, telescoping, allow swift throat width changes for maximizing production. Shaft single keyed for easy tooling changeover
• Forced lubrication system providing full security under harsh working conditions all internal moving components have individual zerk fittings
• Machine operates in both horizontal and vertical positions per your needs
• Mobile control console equipped with pushbuttons for roll positions, dual LED digital readouts to monitor bending roll positions, dual foot pedals for left/right rotation, power on, hydraulic unit on and E-Stop switch for maximum operator safety. Controls in low voltage 24 VAC
• Operating and maintenance tool kit, instruction manual provided
• Specifications
• Working height: Shafts Horizontal 45”, Shafts Vertical 52”
• Thrust: 20 metric tons each cylinder
• Oil capacity: 35 gallons
• Electrical Requirements: 480V Three Phase 60Hz 10HP
• Machine Dims: 78” x 57” x 67”
• Approx Weight: 8,100 lbs
• Capacities (based on 36,000 psi yield steels)
• Flat bar on edge Max Size: 4” x ¾” Min ID: Ø36”
• Max Size: 4” x ¾”
• Min ID: Ø36”
• Flat bar on flat Max Size: 6-3/8” x 1-3/8” Min ID: Ø36”
• Max Size: 6-3/8” x 1-3/8”
• Square bar Max Size: 2-3/8” Min ID: Ø36”
• Max Size: 2-3/8”
• Round bar Max Size: 3” Min ID: Ø36”
• Max Size: 3”
• Angle leg-out Max Size: 4” x ½” Min ID: Ø72”
• Min ID: Ø72”
• Angle leg-in Max Size: 3½” x 3/8” Min ID: Ø72”
• Max Size: 3½” x 3/8”
• Square tube Max Size: 3” x 3/16” Min ID: Ø60”
• Max Size: 3” x 3/16”
• Min ID: Ø60”
• Round tube Max Size: 5” x 13Ga Min ID: Ø60”
• Max Size: 5” x 13Ga
• Rectangular tube, hard way Max Size: 4” x 1½” x 9Ga Min ID: Ø60”
• Max Size: 4” x 1½” x 9Ga
• Pipe, Sch 40 Max Size: 3½” Min ID: Ø72”
• T sections leg-out-in-lateral Max Size: 4”, 3½”, 4” Min ID: Ø42”
• Max Size: 4”, 3½”, 4”
• Min ID: Ø42”
• C sections legs out & in Max Size: 7” x 2¾” Min ID: Ø36”-48”
• Max Size: 7” x 2¾”
• Min ID: Ø36”-48”
• I beams bent easy way Max Size: 7” x 2¾” Min ID: Ø48”
• Min ID: Ø48”
• H beams bent easy way Max Size: 4” x 4” Min ID: Ø48”
• Max Size: 4” x 4”
• Optional Add-Ons
• Other voltages available (please contact a sales rep for more info)
• Tube roll sets
• Pipe roll sets
• NC controls, 3 axis, 10” touch screen HMI w/PLC
• Stepless electronic variable speed control on operator console
• Rolls for bending/rolling special cross sections or extrusions
• Beam bending traction tooling X-X axis hard way bending
• Special additional flanges for bending another beam size, hard way
• Compression tooling for bending C channel hard way on edge
• Special rolls for use with compression tooling for each channel size
• Special tooling for forming half pipe from flat strip, max flat width 7”

Specifications

• Manufacturer: Carell Industrial Solutions
• SKU: HPK100
• Shipping Method: Flatbed
• Weight: 8,000 lb
• Dimensions: 82 × 63 × 70 in