Campro USA 41.3″ x 20.9″ x 30.7″ High Performance 4 Plus 1 Vertical Machining Center with 12” Trunnion CPV-1050B
$87,750.00Current price is: $87,750.00.
- Table diameter: 12.6”
- Maximum Workpiece Diameter: 15.75”
- Spindle nose to trunnion table top: 20.6”
- Maximum Workpiece Weight: 220 lbs.
Campro USA 41.3″ x 20.9″ x 30.7″ High Performance 4 Plus 1 Vertical Machining Center with 12” Trunnion CPV-1050B is a Campro USA product in the Mill Drills collection.
Product Details
- Table diameter: 12.6”
- Maximum Workpiece Diameter: 15.75”
- Spindle nose to trunnion table top: 20.6”
- Maximum Workpiece Weight: 220 lbs.
- Description
- Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.
- Box ways on all 3 axes greatly upgrades stability and dampening capability.
- Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.
- Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.
- Features
- Fanuc Oi-MF PLUS Control
- AICC2+ Contour Control
- 12,000 RPM Spindle (Belt Drive)
- Powerful 25 HP high torque spindle motor
- Cartridge Spindle Design
- CAT40 Big Plus Spindle
- 290 PSI Through Spindle Coolant
- Spindle Air Blow
- Rigid tapping
- Custom Macro B (User Definable)
- Twin Arm 24 Tool ATC
- Portable Manual pulse generator
- Massive One-piece Meehanite cast iron bed
- Chip Auger
- 4th Axis Prep
- Low friction Turcite mating way surfaces
- Double Anchored, Pre-tensioned Ballscrews
- Fast 1,181 IPM Rapid Traverse rate
- Full enclosure splash guard
- Flood coolant with large coolant tank
- Work light
- Operator call lamp (red, yellow, green)
- Spindle load meter
- Assembly and operation tools
- Auto Power Off
- Heat exchanger for Electrical Cabinet
- Instruction manual, parts list, and electrical diagram
- Fanuc operator and maintenance manuals
- WARRANTY-MACHINE: One-Year
- WARRANTY-CONTROL: Two-Years
- Specifications
- Capacity X axis travel: 41.3” Y axis travel: 20.9” Z axis travel: 30.7” Table loading area: 41.3” x 20.9” Allowable table load: 2,200 pounds
- X axis travel: 41.3”
- Y axis travel: 20.9”
- Z axis travel: 30.7”
- Table loading area: 41.3” x 20.9”
- Allowable table load: 2,200 pounds
- Trunnion Table Table diameter: 12.6” Maximum Workpiece Diameter: 15.75” Spindle nose to trunnion table top: 20.6” Maximum Workpiece Weight: 220 lbs.
- Spindle Spindle nose to table top: 3.9” – 34.6” Spindle Bearing Diameter: 2.8” Column to spindle center: 23.2” Spindle taper: CAT 40 Big Plus Spindle speed: 12,000 RPM A.C. spindle motor: 25 HP Spindle torque: 132 ft-lbs. Spindle Driving Method: Belt Drive
- Spindle nose to table top: 3.9” – 34.6”
- Spindle Bearing Diameter: 2.8”
- Column to spindle center: 23.2”
- Spindle taper: CAT 40 Big Plus
- Spindle speed: 12,000 RPM
- A.C. spindle motor: 25 HP
- Spindle torque: 132 ft-lbs.
- Spindle Driving Method: Belt Drive
- Automatic Tool Changer ATC Type: Twin Arm Type Number of Tools: 24 Tool Shank: CAT 40 Max. Tool Dia.: 3.1” Max. Tool Diameter (No Adjacent Tool): 5.9” Max. Tool Length: 9.8” Max. Tool Weight: 15.4 lbs. Tool Selection: Random Bi-Directional
- ATC Type: Twin Arm Type
- Number of Tools: 24
- Tool Shank: CAT 40
- Max. Tool Dia.: 3.1”
- Max. Tool Diameter (No Adjacent Tool): 5.9”
- Max. Tool Length: 9.8”
- Max. Tool Weight: 15.4 lbs.
- Tool Selection: Random Bi-Directional
- Motion X and Y axis rapid traverse rate: 1,181 IPM Z axis rapid traverse rate: 1,181 IPM Cutting feed rate: 393 IPM Slide Type: Box Ways Least command increment: 0.001mm Roundness accuracy: < 0.00020" Bi-Directional Accuracy: < 0.00020” Bi-Directional Repeatability: < 0.00030”
- X and Y axis rapid traverse rate: 1,181 IPM
- Z axis rapid traverse rate: 1,181 IPM
- Cutting feed rate: 393 IPM
- Slide Type: Box Ways
- Least command increment: 0.001mm
- Roundness accuracy: < 0.00020"
- Bi-Directional Accuracy: < 0.00020”
- Bi-Directional Repeatability: < 0.00030”
- General Floor Space Required (W x D X H): 125" x 96" X 120” Machine Weight: 14,770 lbs. Standard Power Source Requirement – Fanuc: 205-235 Volts /3 Phase/60HZ Power Capacity: 53 Amps Minimum Air Source Requirement: 85 – 115 PSI
- Floor Space Required (W x D X H): 125" x 96" X 120”
- Machine Weight: 14,770 lbs.
- Standard Power Source Requirement – Fanuc: 205-235 Volts /3 Phase/60HZ
- Power Capacity: 53 Amps Minimum
- Air Source Requirement: 85 – 115 PSI
- Options
- 290 PSI CTS
Specifications
- Manufacturer: Campro USA
- SKU: CPV-1050B (TJR-320)
- Shipping Method: Flatbed
- Weight: 14,870 lb
- Dimensions: 130 × 101 × 125 in
| Weight | 14870.0 lbs |
|---|---|
| Dimensions | 130.0 × 101.0 × 125.0 in |
| Brand | Campro USA |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Baileigh 60″ x 144″ CNC Water Jet WJ-512CNC
Baileigh 96″ x 60″ CNC Water Jet WJ-85CNC
GMC Machinery 5 HP 220V Heavy Duty Wet 2100 CFM Dust Collector WDC-2100
Reviews
There are no reviews yet.