Powermatic 60HH 8″ Jointer 2HP 1Ph 230V Helical Head
$2,111.40Current price is: $2,111.40.
- NACuts Per Minute
- HelicalCutter Block
- 3Cutter Block Diameter
- 7000Cutter Block Speed
9 in stock
Overview
Powermatic 60HH 8" Jointer 2HP 1Ph 230V Helical Head is documented as a Jointer from Powermatic Tools. The exact PM9-1610086K configuration is mapped to GT Machinery Solutions SKU JPW1610086K. Recorded technical data includes horsepower: 2 HP, motor power: 2, and motor voltage (v.): 230 only. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Technical Specifications
| Cuts Per Minute | NA |
|---|---|
| Cutter Block | Helical |
| Cutter Block Diameter | 3 |
| Cutter Block Speed | 7000 |
| Cutter Head Speed | 7000 RPM |
| Cutting Capacity (W x D) (In.) | 8 x 1/2 |
| Drive Motor | 1 |
| Dust Collection Minimum CFM Required (CFM) | 450 |
| Dust Port Outside Diameter (In.) | 4 |
| Fence Positive Stops (Deg.) | 45, 90, -45 |
| Fence Size (L x H) (In.) | 38 x 4-3/4 |
| Fence Tilt (Deg.) | 45 Forward, 45 Backward |
| Horsepower | 2 HP |
| Infeed Table Length (In.) | 35-1/4 |
| Motor Current (amps) | 9 |
| Motor Phase | 1 |
| Motor Power | 2 |
| Motor Voltage (V.) | 230 only |
| Number of Knives | 54 Four-Sided Carbide Helical Inserts |
| Outfeed Table Length (In.) | 35-1/2 |
| Prewired Voltage (V.) | 230 |
| Product Type | Jointer |
| Rabbeting Capacity (In.) | NA |
| Rabbeting Ledge (In.) | 45293 |
| Recommended Circuit Size (Amps.) | 20 |
| Table Height from Floor (In.) | 32 |
| Table Size (L x W) (In.) | 73 x 8-1/2 |
| Voltage | 230V |
| Warranty | 5 Years |
| Weight | 518.000 lbs |
| Weight | 518 lbs |
|---|---|
| Brand | Powermatic Tools |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Powermatic 1632 Open End Wide Belt Sander 5HP 1Ph 230V
Powermatic 201HH Planer 7.5HP 1Ph 230V
Powermatic 209HH 20″ Planer 5HP 3Ph 230/460V
Powermatic 3520C Lathe 2HP 1Ph 220V
Powermatic 60C 8″ Jointer 2HP 1Ph 230V
Powermatic DDS-237 Drum Sander 10HP 3Ph 230V
Powermatic PJ882 8″ Jointer 2HP 1Ph 230V
Reviews
There are no reviews yet.