Cantek PCM508 20″ Pneumatic Cut-Off Saw with Rotary Table Three Phase
$11,340.00Current price is: $11,340.00.
- 1"Arbor
- 20"Blade Diameter
- 7.5HPHorsepower
- 3Phase
7 in stock
Overview
Cantek PCM508 20" Pneumatic Cut-Off Saw with Rotary Table Three Phase is documented as a Cut-Off Saw from Cantek America. The exact CANPCM508-230-3 configuration is mapped to GT Machinery Solutions SKU CANPCM508. Recorded technical data includes horsepower: 7.5HP, voltage: 230V/460V, and phase: 3. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Key Features
- The table can be swiveled to right and left with 45° (max. 60°) angle. This allows for angular cutting.
- The table is equipped with a lock pin, allowing the table to fast position at 45° (60°) .
- Table surface is precision ground.
- The clamping mechanism is driven by an air cylinder in combination with the use of linear guide ways, that exhibit fast and smooth clamping motions
- Infeed and outfeed fence surfaces are precision ground.
- Equipped with an anti-bump rubber to prevent serious bumping of clamp.
Technical Specifications
| Arbor | 1" |
|---|---|
| Blade Diameter | 20" |
| Horsepower | 7.5HP |
| Phase | 3 |
| Product Type | Cut-Off Saw |
| Voltage | 230V/460V |
| Weight | 1,500.000 lbs |
Available Documents
| Weight | 1500 lbs |
|---|---|
| Brand | Cantek America |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Cantek HS21T 21 Spindle Construction Boring Machine
Cantek JDT65 Manual Dovetail Machine Single Phase
Cantek SR750 Overhead Router 7.5HP Three Phase
DWM 10″ x 24″ x 42″ Drawer Master Assembly Clamp
MX350M Automatic Edgebander with Premilling, 1 Phase
Reviews
There are no reviews yet.