Marvel 3 HP 230V Three Phase Horizontal Mitering Band Saw S330/2HV

Marvel 3 HP 230V Three Phase Horizontal Mitering Band Saw S330/2HV is a Marvel product in the Band Saws collection.

Product Details

• Speed Range: Infinitely Variable
• 3 HP Motor
• 60° Miter Cutting
• Hydraulic Vise
• Specifications and Features
• Capacity at 90°: 12” H x 18” W Rectangle, 13” Round.
• Capacity at 45°: 11” H x 12” W Rectangle, 13” Round.
• Capacity at 60°: 11” H x 8” W Rectangle, 9.5” Round.
• Blade: 13’ 6” L x 1” W x .035” T (4115 mm x 27 mm x 0.9 mm)
• Blade Tension: Manual tension (30,000 psi) provides consistent square cutting accuracy.
• Speed Range: Blade speed is infinitely variable through an Inverter Drive heavy-duty worm gear transmission. Blade speeds are 60 – 330 feet per minute (18 – 100 meters per minute). The broad speed range allows for optimum cutting of a large spectrum of materials.
• Hydraulic Down Feed: Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting. Settings are made at the operator’s control station.
• Hydraulic Frame Return: The saw frame is raised hydraulically using a push button mounted on the operator’s control panel.
• Motors: Blade Drive: 3 H.P. (1.5kW). Hydraulic Pump: .5 H.P. (0.375kW) Coolant Pump Motor: .125 H.P. (0.09 kW).
• Voltage: 230-3-60 Volt
• Blade Guides: Carbide Blade Guides provides reduced vibration, heat and blade stress providing longer blade life and accuracies of + .002 per inch (.051 mm) of cut material.
• Chip Brush: Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
• Vise Jaw: Hydraulic rack and pawl vise design clamps and holds the work piece securely. The vise is operated by a selector switch located on the operator’s control panel. Maximum vise opening is 18” (460 mm) and jaw height is 7” (179 mm).
• Swivel: The saw frame swivels a full 60 degrees to the rear and 45 degrees to the front for optimum miter cutting capability. The pivot shaft has sealed bearings for maintenance free operation, while a pointer and angle scale (-60o TO + 45o ) make setup fast and easy. Stops are provided at -60 and +45 degrees.
• Operators Control Panel: Operation of the machine is safe and convenient from the swing arm pedestal mounted on the machine base. Control Voltage is 110V.
• Other Standard Features 16” (406 mm) Diameter Cast Iron Blade Wheels 30.5” Work Height Built in Coolant System 6 gal (23 L) Coolant Tank Guide Arm with Dove Tail Slide
• 16” (406 mm) Diameter Cast Iron Blade Wheels
• 30.5” Work Height
• Built in Coolant System
• 6 gal (23 L) Coolant Tank
• Guide Arm with Dove Tail Slide
• Crated Machine Weight: 2,300 lbs (1043 kg)
• Machine Floor Dimensions (with miter): 86.5” W x 82.5” L x 53.25” H (2197 mm W x 2096 mm L x 1353 mm H)
• Options
• Free Standing Control Console: Replaces standard control console mounted to machine base with a free-standing pedestal and flexible electrical and hydraulic lines.
• Variable Vise Pressure: Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material.

Specifications

• Manufacturer: Marvel
• SKU: S330/2HV
• Shipping Method: LTL Freight
• Weight: 2,300 lb
• Dimensions: 90 × 70 × 70 in
• Country of Origin: United States of America
• Warranty: 1 Year (Parts)