Oliver 4235.23 8″ Parallelogram Jointer with Helical Cutter Head 3HP, 1PH
$2,132.83Current price is: $2,132.83.
- 5,500 RPMCutter Head Speed
- 90°/45°Fence Positive Stops (Deg.)
- 90°/45°/135°Fence Tilt (Deg.)
- 3HPHorsepower
5 in stock
Overview
Oliver 4235.23 8" Parallelogram Jointer with Helical Cutter Head 3HP, 1PH is documented as a Jointer from Oliver. The exact 4235.23 configuration is mapped to GT Machinery Solutions SKU OLV4235.230. Recorded technical data includes horsepower: 3HP, motor voltage (v.): 230V, and voltage: 230V. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Technical Specifications
| Cutter Head Speed | 5,500 RPM |
|---|---|
| Fence Positive Stops (Deg.) | 90°/45° |
| Fence Tilt (Deg.) | 90°/45°/135° |
| Horsepower | 3HP |
| Motor Current (amps) | 8A |
| Motor Phase | 1PH |
| Motor Voltage (V.) | 230V |
| Number of Knives | 36 |
| Phase | 1PH |
| Product Type | Jointer |
| Rabbeting Capacity (In.) | 1/2" |
| Table Size (L x W) (In.) | 72" x 8" |
| Voltage | 230V |
| Weight | 490.000 lbs |
| Weight | 490 lbs |
|---|---|
| Brand | Oliver |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Cantek J168LH 16″ Spiral Head Jointer Three Phase
SCM F520T 3-Phase 8Hp 20″ Jointer w/Tersa cutterblock & 108+″ longbed table
SCM Minimax FS 41ES – X Combined Planer-Thicknesser with Xylent Cutterblock, 3 Phase
Reviews
There are no reviews yet.