Laguna MLAREVO 1836-220 18|36 Lathe 220V 2HP
$2,189.40Current price is: $2,189.40.
- 500 lbsWeight
- LathesProduct Type
- 2 HPPower
- LTMLAREVO1836-220SKU
2 in stock
Overview
Laguna MLAREVO 1836-220 18|36 Lathe 220V 2HP is documented as a model-specific catalog item from Laguna Tools. The exact MLAREVO 1836-220 configuration is mapped to GT Machinery Solutions SKU LTMLAREVO1836-220. Recorded technical data includes weight: 500.000 lbs. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Key Features
- Electrical: 2HP, 220 Volt, 60 hz
- Motor: Induction, 1725 RPM, TEFC
- VFD: Delta S1 Variable Frequency Drive
- Phase: 1 Phase input, 3 Phase output
- Poly-Groove Drive Belt w EZ Access
- Recommended Breaker: 15 Amp
- Spring Loaded Spindle Lock
- Max. Outboard Swing: 32”
- Swing over Banjo: 13 ½”
- Steel Bed: ASTM A36
Technical Specifications
| Weight | 500.000 lbs |
|---|
| Weight | 500 lbs |
|---|---|
| Brand | Laguna Tools |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Laguna MBAND18CX110175 18|CX 16″ Bandsaw 110V 1.75HP
Laguna MDCPF32201 P|Flux: 3 Dust Collector 220V 3HP Single Phase
Laguna MJ16X100P-0130 JX|16 Sheartec: II Jointer 220V 7.5HP Three Phase
Laguna MPLANPX16-0130 PX|16 Sheartec II Planer 220V 5HP Single Phase
Laguna MPLANPX2275-0130 PX|22 Sheartec II Planer 7.5HP Single Phase
Laguna MSHAP5010-0130 Pro Shaper 220V 5HP Single Phase
Laguna MSHAP5030-0130 Pro Shaper 220V 7.5HP Three Phase
Reviews
There are no reviews yet.