Powermatic 209 Planer 5HP 1Ph 230V
$3,101.40Current price is: $3,101.40.
- 20000Cuts Per Minute
- 5000Cutter Block Speed
- Straight KnifeCutter Head Type
- Inch / MetricDigital Readout
6 in stock
Overview
Powermatic 209 Planer 5HP 1Ph 230V is documented as a Planer from Powermatic Tools. The exact PM9-1791296 configuration is mapped to GT Machinery Solutions SKU JPW1791296. Recorded technical data includes horsepower: 5 HP, motor power: 5, and motor voltage (v.): 230 only. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Technical Specifications
| Cuts Per Minute | 20000 |
|---|---|
| Cutter Block Speed | 5000 |
| Cutter Head Type | Straight Knife |
| Digital Readout | Inch / Metric |
| Drive Motor | 1 |
| Dust Collection Minimum CFM Required (CFM) | 900 |
| Dust Port Outside Diameter (In.) | 5 |
| Feed Rate | 24/31 & 16/20 |
| Horsepower | 5 HP |
| Maximum Full Width Depth of Cut (In.) | 11749 |
| Maximum Planing Thickness (In.) | 8 |
| Maximum Planing Width (In.) | 20 |
| Motor Current (Amps) | 23 |
| Motor Phase | 1 |
| Motor Power | 5 |
| Motor Voltage (V.) | 230 only |
| Number of Knives | 4 Straight High Speed Steel Knives |
| Number of Speeds | 4 |
| Prewired Voltage (V.) | 230 only |
| Product Type | Planer |
| Recommended Circuit Size (Amps.) | 40 |
| Style (Type) | Floor |
| Table Size (L x W) (In.) | 25-3/4 x 20 |
| Table Support | 4 Column |
| Type of Cutterhead | Straight Knife |
| Voltage | 230V |
| Warranty | 5 Years |
| Weight | 880.000 lbs |
| Weight | 880 lbs |
|---|---|
| Brand | Powermatic Tools |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Powermatic 1632 Open End Wide Belt Sander 5HP 1Ph 230V
Powermatic 2020B Lathe 2HP 1Ph/3Ph 230V
Powermatic 4224B Lathe with Lamp Kit
Powermatic 60C 8″ Jointer 2HP 1Ph 230V
Powermatic DDS-237 Drum Sander 10HP 3Ph 230V
Powermatic DT45 Dovetailer 1HP 1Ph 115/230V
Reviews
There are no reviews yet.