Powermatic PM1800B 18″ Bandsaw 5HP 3Ph 230/460V
$4,817.40Current price is: $4,817.40.
- 160Blade Length (in)
- 2300/4400 SFPMBlade Speed
- 2300/4400Blade Speed (SFPM)
- 18Cutting Capacity Height (In.)
8 in stock
Overview
Powermatic PM1800B 18" Bandsaw 5HP 3Ph 230/460V is documented as a Drum Sander from Powermatic Tools. The exact PM9-1791801B configuration is mapped to GT Machinery Solutions SKU JPW1791801B. Recorded technical data includes horsepower: 5 HP, motor power (hp): 5, and motor voltage (v.): 230/460. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Technical Specifications
| Blade Length (in) | 160 |
|---|---|
| Blade Speed | 2300/4400 SFPM |
| Blade Speed (SFPM) | 2300/4400 |
| Cutting Capacity Height (In.) | 18 |
| Cutting Capacity Width (In.) | 18 |
| Dust Collection Minimum CFM Required (CFM) | 600 |
| Dust Port Outside Diameter (in) | 4 |
| Horsepower | 5 HP |
| Maximum Tilt | 45° |
| Miter Gauge Positive Stops | 45, 90 |
| Motor Current (Amps) | 15/7.5 |
| Motor Phase | 3 |
| Motor Power (HP) | 5 |
| Motor Voltage (V.) | 230/460 |
| Prewired Voltage (V.) | 230 |
| Product Type | Drum Sander |
| Stand Type | Floor |
| Table Height from Floor (In.) | 38 |
| Table Size | 24" x 27" |
| Table Size (L x W) (In.) | 24 x 27 |
| Table Tilt (Deg.) | 10 Left, 45 Right |
| Voltage | 230/460V |
| Warranty | 5 years |
| Weight | 930.000 lbs |
| Weight | 930 lbs |
|---|---|
| Brand | Powermatic Tools |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Powermatic 1632 Open End Wide Belt Sander 5HP 1Ph 230V
Powermatic 201HH Planer 7.5HP 1Ph 230V
Powermatic 209 Planer 5HP 3Ph 230/460V
Powermatic 60C 8″ Jointer 2HP 1Ph 230V
Powermatic DDS-237 Drum Sander 10HP 3Ph 230V
Powermatic DT45 Dovetailer 1HP 1Ph 115/230V
Reviews
There are no reviews yet.