Cantek CM626 26″ Single Surface Heavy Duty Planer 20HP Three Phase
$15,300.00Current price is: $15,300.00.
- 4-3/4"Cutter Head Diameter
- SpiralCutter Head Type
- 20HPHorsepower
- 3Phase
2 in stock
Overview
Cantek CM626 26" Single Surface Heavy Duty Planer 20HP Three Phase is documented as a Planer from Cantek America. The exact CANCM626-230-3 configuration is mapped to GT Machinery Solutions SKU CANCM626. Recorded technical data includes horsepower: 20HP, voltage: 230V/460V, and phase: 3. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Key Features
- Spiral cutterhead with 6 rows insert knives provides high removal, superior finish and low noise
- Solid cast iron construction
- Variable feed speed
- Drive top and bottom feed rolls
- Front & rear bed rollers easily adjusted from the front of the machine
- Power table elevation by digital thickness control
- Section infeed roll and section chipbreaker
- Anti-kickback fingers for added safety
- Dual heavy jack screws with slides for accuracy & rigidity
- Dust exhaust outlet (6″)
Technical Specifications
| Cutter Head Diameter | 4-3/4" |
|---|---|
| Cutter Head Type | Spiral |
| Horsepower | 20HP |
| Phase | 3 |
| Product Type | Planer |
| Voltage | 230V/460V |
| Weight | 2,420.000 lbs |
| Width | 26" |
Available Documents
| Weight | 2420 lbs |
|---|---|
| Dimensions | 26 in |
| Brand | Cantek America |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Cantek J127LH 12″ Spiral Head Jointer Single Phase
Cantek PC100 Pocket Hole Machine
DWM 10″ x 24″ x 42″ Drawer Master Assembly Clamp
MX350M Automatic Edgebander with Premilling, 3 Phase
Reviews
There are no reviews yet.