Cantek ST152C Single End Tenoner
$12,180.00Current price is: $12,180.00.
- 45-9/32"Height
- 7.5 HPHorsepower
- 66-9/64"Length
- 2Phase
5 in stock
Overview
Cantek ST152C Single End Tenoner is documented as a Single End Tenoner from Cantek America. The exact CANST152C-230-3 configuration is mapped to GT Machinery Solutions SKU CANST152C. Recorded technical data includes horsepower: 7.5 HP, phase: 2, and range of speeds: 3400 RPM. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Key Features
- 5 heads
- CSA Telemecanique switches
- Carbide insert spiral tenon heads
- 1 ¼” dia. spindle
- 6″ long x 5″ thick tenons heads. Spiral with carbide insert tooling
- 2 x 5HP motors
- 3400 RPM
- 14 mm square carbide tips on end of cutterheads to produce clean cut shoulder
- 1″ lateral adjustment of tenon heads
- 1 ¼” dia. spindle, 6000 RPM
Technical Specifications
| Height | 45-9/32" |
|---|---|
| Horsepower | 7.5 HP |
| Length | 66-9/64" |
| Phase | 2 |
| Power | 230V |
| Product Type | Single End Tenoner |
| Range of Speeds | 3400 RPM |
| Weight | 1,470.000 lbs |
| Width | 72-7/16" |
| Weight | 1470 lbs |
|---|---|
| Dimensions | 66.142 × 72.437 × 45.28 in |
| Brand | Cantek America |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Cantek EM12 End Matcher
Cantek JDT65 Manual Dovetail Machine Single Phase
Cantek SR750 Overhead Router 7.5HP Three Phase
DWM 10″ x 24″ x 42″ Drawer Master Assembly Clamp
MX350M Automatic Edgebander with Premilling, 1 Phase
MX350M Automatic Edgebander with Premilling, 3 Phase
Reviews
There are no reviews yet.