Powermatic 1285 12″ Jointer 3HP 1Ph 230V Straight Knife Cutterhead
$5,147.40Current price is: $5,147.40.
- 15000Cuts Per Minute
- StraightCutter Block
- 5000Cutter Block Speed
- 5000 RPMCutter Head Speed
4 in stock
Overview
Powermatic 1285 12" Jointer 3HP 1Ph 230V Straight Knife Cutterhead is documented as a Jointer from Powermatic Tools. The exact PM9-1791241 configuration is mapped to GT Machinery Solutions SKU JPW1791241. Recorded technical data includes horsepower: 3 HP, motor power: 3, and motor voltage (v.): 230 only. Use the specification table and linked product literature to confirm electrical, capacity, dimensional, and installation requirements for project planning.
Technical Specifications
| Cuts Per Minute | 15000 |
|---|---|
| Cutter Block | Straight |
| Cutter Block Speed | 5000 |
| Cutter Head Speed | 5000 RPM |
| Cutting Capacity (W x D) (In.) | 11-3/4 x 3/4 |
| Dust Collection Minimum CFM Required (CFM) | 800 |
| Dust Port Outside Diameter (In.) | 4 |
| Fence Positive Stops (Deg.) | 45, 90, -45 |
| Fence Size (L x H) (In.) | 47-1/4 x 5-1/4 |
| Fence Tilt (Deg.) | 45 Forward, 45 Backward |
| Horsepower | 3 HP |
| Motor Phase | 1 |
| Motor Power | 3 |
| Motor Voltage (V.) | 230 only |
| Number of Knives | 3 High Speed Steel Straight Knives |
| Phase | 1 |
| Product Type | Jointer |
| Recommended Circuit Size (Amps.) | 30 |
| Table Height from Floor (In.) | 31-5/8 |
| Table Size (L x W) (In.) | 84 x 12 |
| Voltage | 230V |
| Warranty | 5 Years |
| Weight | 946.000 lbs |
| Weight | 946 lbs |
|---|---|
| Brand | Powermatic Tools |
Clear handling and delivery estimates for every order.
Standard delivery is included to eligible commercial addresses in the contiguous United States and District of Columbia. We review the destination and receiving requirements before release, then confirm the applicable handling and transit schedule.
-
01
Order review
After checkout, we confirm product availability, destination type, site access and required carrier service before release.
-
02
Handling and dispatch
In-stock, ready-to-ship ground products generally leave within 1 business day. Manufacturer-prepared, configured or special-order machines may require additional lead time.
-
03
Estimated transit
Ground orders commonly arrive 5–7 business days after shipment. Equipment over 100 lb normally travels by LTL in about 7–10 business days after shipment.
-
04
Inspect on delivery
Check every piece before signing. Record visible damage or shortages on the delivery receipt, take photos and contact us promptly.
Delivery times are estimates, not guarantees. Manufacturer lead time, product preparation, configured or special-order equipment, weather, carrier capacity, remote destinations and appointment scheduling may add time. GT Machinery Solutions will communicate a material delay and the best available revised estimate.
Related products
Powermatic 1285 12″ Jointer 3Ph 1Ph 230V Helical Cutterhead
Powermatic 15HH Planer 3HP 1Ph 230V
Powermatic 2020B Lathe 2HP 1Ph/3Ph 230V
Powermatic 209HH 20″ Planer 5HP 1Ph 230V
Powermatic 60C 8″ Jointer 2HP 1Ph 230V
Powermatic DDS-237 Drum Sander 10HP 3Ph 230V
Powermatic DT45 Dovetailer 1HP 1Ph 115/230V
Reviews
There are no reviews yet.